STM32F373 - Demo CAN, RS485 and I/O.

Moderators: dhowells, RobertKleczek

STM32F373 - Demo CAN, RS485 and I/O.

Postby dhowells » Sat Sep 13, 2014 4:58 pm

Just an update - have built up 4 of the 10 demo boards. One's a lost hope but have three programming up with an ST-LINK clone just fine.

Demo board will probably drop the LIN interface - since when enabled it is necessary to maintain the windowed watchdog timer. Failure to 'pat' the watchdog will eventually result in complete shutdown of the power supply - and not just generate repeated resets! Quite problematic during development.

Will update as soon as GPL GNAT can be used with it.
Site Admin
Posts: 11
Joined: Tue Sep 02, 2014 1:04 am

Return to STM

Who is online

Users browsing this forum: No registered users and 1 guest